- Speed Reducers[7]
- Other Hardware[7]
- Linear Guides[7]
- Deep Groove Ball Bearings[10]
- Shaft Couplings[7]
- Linear Bearings[1]
- Sliding Bearings[10]
- Other Auto Parts[10]
- Chains[7]
- Other Bearings[6]
- Other Roller Bearings[1]
- Thrust Ball Bearings[6]
- Washers[1]
- Pillow Block Bearings[7]
- Other Fasteners[7]
- Rod End Bearings[7]
- Spherical Roller Bearings[5]
- Self-aligning Ball Bearings[2]
- Angular Contact Ball Bearings[7]
- Road Roller[7]
- Housings[6]
- Pipe Fittings[1]
- Contact Person : Ms. Wen Yingchang
- Company Name : Dongguan Beiling Bearing Co., Ltd.
- Tel : 86-769-13602326620
- Fax : 86-769-22466116
- Address : Guangdong,Dongguan,No.1, A05 building, Hongcheng International Hardware&Electrical market, Dongguan City, Guangdong Province, China(Mainland).
- Country/Region : China
- Zip : 523000
DC7969C Clutch Bearing
DC7969C Clutch Bearing:
Type DC is a sprag type freewheel cage without inner or outer races.
It must be installed in a design providing races, bearing support for axial and radial loads, lubrication and sealing.
The sprag space tolerance must not be exceeded. Inner and outer races must both have a minimum plain width “e”, without any recess, to ensure the freewheel functions correctly as shown on following pages.
Description:
1.Type FDC2222G is a sprag type freewheel cage without inner or outer races. Its model and construction is followed for, this type provides higher torque and lower noise while fixed convenient.
2.It must be installed in a design providing races, bearing support for axial and radial loads, lubrication and sealing.
3.The sprag space tolerance must not be exceeded. Inner and outer races must both have a minimum plain widthe, without any recess, to ensure the freewheel functions correctly as shown on following pages.
4.We can offer standard inner and outer races, as shown on the following pages.
5.Alternatively, races can be made in case hardened steel shafts, or housings, to the specification below.
6.Surface hardness of the finished pargt should be HRC 60 to 62°, for a depth of 0.6mm minimum.
7.Core hardness to be HRC 35 to 45°. Surface roughness not to exceed 22CLA . Maximum taper between races:0.007mm for25mm Width.
DC7969C Clutch Bearing